lkpcollector.blogg.se - Comment installer un modem wifi djaweb admin

#COMMENT INSTALLER UN MODEM WIFI DJAWEB ADMIN MANUALS#
#COMMENT INSTALLER UN MODEM WIFI DJAWEB ADMIN PASSWORD#

Power indicator is off, please check if you plug the power adapter properly.Main menu of WEB UI: Faulty checking and Notices After finish the setting, click the apply, the device will restart autom- atically.In the main menu of WEB UI, it including CPE status, router setting, WiFi setting,firewall, SMS setting, system management and etc.

#COMMENT INSTALLER UN MODEM WIFI DJAWEB ADMIN PASSWORD#

Enter the user name and password into the prompt dialog box, user name and password are: admin.Enter the IP address into the address bar of browser, IP address is as right picture.Open the browser of com- puter or mobile phone.Make sure the 4G CPE is power on, and your com- puter and mobile phone connected with 4G CPE.CPE Lm321 SSID:4G-CPE-XXXXXX Login/password:admin Router IP:192.168.100.1 WIFI KEY:A1b2c3d4 (The WiFi setting interface is different for different end devices, refer to the following device). Enter WiFi password, click connect, WiFi connection is successful after WiFi indicator blinking.Click the SSID of CPE, SSID and password are on the sticker of CPE, refer to the right picture.Power on the end device to enter the WiFi setting.Make sure CPE is turned on, and WiFi is on working.4G CPE will automatically dial-up, 3G/4G indicator steady on, then blinking, it means the device already connect with Internet.Open the packing box, insert the power adapter into the power port of CPE.Insert the standard Micro SIM card as following picture:.

smart phone Access to internet through 3G/4G network.

Or connect the end device through WiFi, WiFi indicator will blinking once data is being transmitted.

Connect the LAN port to the end device, LAN indicator will steady on, it will blinking once data is being transmitted.

Connect the WAN port to Ethernet port, WAN indicator will steady on, it will blinking once data is being transmitted.

After power on, all indicators will on, then power indicator steady on, WiFi indicator steady on.

Open the packing box, insert the power adapter into the power port of CPE.

Notice: Place the device on a stable surface.

smart phone Access to internet by Ethernet.

The first RJ45 port near power port is WAN or LAN, the rest are LAN ports 8 SIM card slot Insert SIM card to connect to 4G/3G network,support Micro SIM card only 9 Reset button Long press for 5 seconds,CPE will restore to factory setting,device restart automatically. 4 LAN indicator On：plug cable to LAN port,indicator is on Off：cable pulled out,indicator off 5 3G/4G indicator Insert SIM card,successfully registered to 4G/3G network,indicator is on 4G/3G not registered,indicator off 6 Power port CPE power input:12V 1A,please use standard power adapter 7 LAN port To provide cable network to users. 3 WiFi indicator On:when user connected to WIFI, indicator is on.

Get to know your LTE Indoor CPE 1 Power indicator On：CPE connected to power,indicator is on Off:CPE not connected to power,indicator is off 2 WAN indicator On:insert SIM card ,successfully registered to 4G/3G network ,indicator turns green； Off：CPE not connected to power,or no SIM card,or not registered to network.

#COMMENT INSTALLER UN MODEM WIFI DJAWEB ADMIN MANUALS#

10.1 Related Manuals / Resources 4G LTE CPE Wireless WiFi Router User ManualĤG LTE LTE CPE Wireless WiFi Router User Manual Product Overview